Adapter Sleeves D1 200-400mm 

Adapter Sleeves D1 200-400mm 

  • Adapter Sleeves D1 200-400mm 
Packaging: Plastic-bag/ Box /Carton 

Product Description

Adapter sleeves are using for locating bearings with a tapered bore onto a cylindrical seating as they can be used on smooth or stepped shafts. They are easy to mount and require no additional location on the shaft. When adapter sleeves are used on smooth shafts, the bearing can be located at any position on the shaft. When used on stepped shafts, together with an abutment ring, bearings can be accurately positioned axially and bearing dismounting is also facilitated









Designation G d d1 d3 B1 B2 B3 locknut locking clip
H3044 Tr220×4 220 200 260 126 30 41 HM3044 MS3044
H3144 Tr220×4 220 200 280 158 32 44 HM3144 MS3144
H2344 Tr220×4 220 200 280 183 32 44 HM3144 MS3144
H3944 Tr220×4 220 200 260 96 30 41 HM3044 MS3044
H3048 Tr240×4 240 220 290 133 34 46 HM3048 MS3052-48
H3148 Tr240×4 240 220 300 169 34 46 HM3148 MS3144
H2348 Tr240×4 240 220 300 196 34 46 HM3148 MS3144
H3948 Tr240×4 240 220 290 101 34 46 HM3048 MS3052-48
H3052 Tr260×4 260 240 310 145 34 46 HM3052 MS3052-48
H3152 Tr260×4 260 240 330 187 36 49 HM3152 MS3152
H2352 Tr260×4 260 240 330 208 36 49 HM3152 MS3152
H3952 Tr260×4 260 240 310 116 34 46 HM3052 MS3052-48
H3056 Tr280×4 280 260 330 152 38 50 HM3056 MS3056
H3156 Tr280×4 280 260 350 192 38 51 HM3156 MS3152
H2356 Tr280×4 280 260 350 221 38 51 HM3156 MS3152
H3956 Tr280×4 280 260 330 121 38 50 HM3056 MS3056
H3060 Tr300×4 300 280 360 168 42 54 HM3060 MS3060
H3160 Tr300×4 300 280 380 208 40 53 HM3160 MS3160
H3260 Tr300×4 300 280 380 240 40 53 HM3160 MS3160
H3960 Tr300×4 300 280 360 140 42 54 HM3060 MS3060
H3064 Tr320×5 320 300 380 171 42 55 HM3064 MS3068-64
H3164 Tr320×5 320 300 400 226 42 56 HM3164 MS3164
H3264 Tr320×5 320 300 400 258 42 56 HM3164 MS3164
H3964 Tr320×5 320 300 380 140 42 55 HM3064 MS3068-64
H3068 Tr340×5 340 320 400 187 45 58 HM3068 MS3068-64
H3168 Tr340×5 340 320 440 254 55 72 HM3168 MS3172-68
H3268 Tr340×5 340 320 440 288 55 72 HM3168 MS3172-68
H3968 Tr340×5 340 320 400 144 45 58 HM3068 MS3068-64
H3072 Tr360×5 360 340 420 188 45 58 HM3072 MS3072
H3172 Tr360×5 360 340 460 259 58 75 HM3172 MS3172-68
H3272 Tr360×5 360 340 460 299 58 75 HM3172 MS3172-68
H3972 Tr360×5 360 340 420 144 45 58 HM3072 MS3072
H3076 Tr380×5 380 360 450 193 48 62 HM3076 MS3080-76
H3176 Tr380×5 380 360 490 264 60 77 HM3176 MS3176
H3976 Tr380×5 380 360 450 164 48 62 HM3076 MS3080-76
H3080 Tr400×5 400 380 470 210 52 66 HM3080 MS3080-76
H3180 Tr400×5 400 380 520 272 62 82 HM3180 MS3184-80
H3980 Tr400×5 400 380 470 168 52 66 HM3080 MS3080-76
H3084 Tr420×5 420 400 490 212 52 66 HM3084 MS3084
H3984 Tr420×5 420 400 490 168 52 66 HM3084 MS3084


Adapter sleeves

Adapter sleeves are using for locating bearings with a tapered bore onto a cylindrical seating as they can be used on smooth or stepped shafts. They are easy to mount and require no additional location on the shaft.

When adapter sleeves are used on smooth shafts, the bearing can be located at any position on the shaft. When used on stepped shafts, together with an abutment ring, bearings can be accurately positioned axially and bearing dismounting is also facilitated.




Basic design
ADP adapter sleeves are supplied complete with lock nut and locking device. Smaller sizes use a lock nut with a locking washer, larger sizes use a nut with locking clip. The sleeves are slotted and have an external taper of 1:12. ADP supplies–metric adapter sleeves, series designations H and OH–metric adapter sleeves for shafts with inch dimensions, series designations HA, HE and HS –adapter sleeves with inch dimensions, series designations SNW and SNPDesigns for hydraulic mountingMetric adapter sleeves To enable the hydraulic mounting to ease mounting and dismounting, metric ADP adapter sleeves having a bore diameter of 140 mm up to 500 mm can be supplied to special order already prepared for hydraulic mountings. In addition to these standard sleeves which are designated OH .. H and shown in the product tables, ADP produces sleeves to three other designs which differ in the number and arrangement of the oil ducts and distributor grooves.


Materials
The materials using in ADP adapter sleeves are carbon steel with a tensile strength at least 430N /mm2,
Dimensions
The dimensions of metric ADP adapter sleeves are in accordance with ISO 2982-1:1995; except the bore diameter of metric sleeves for inch shafts.The dimensions of ADP adapter sleeves with inch dimensions are in accordance with ANSI/ABMA Std. 8.2-1991.
Tolerances
The bore diameter of metric ADP adapter sleeves is to tolerance JS9, the width to h15.The tolerances of ADP adapter sleeves with inch dimensions are in accordance with ANSI/ABMA Std. 8.2-1991.
Thread
Metric ADP adapter sleeves up to size 40 have metric threads with 6g tolerances, according to ISO 965-3:1998. Larger adapter sleeves have metric trapezoidal threads with 7e tolerances, according to ISO 2903:1993.ADP adapter sleeves with inch dimensions up to and including size 64 (12 inch shaft diameter) have UnifiedSpecial Form threads (based on the old American National form, class 3 design). Larger sleeves have Acme Class 3G, General Purpose threads.
Shaft tolerances
Generally, the form tolerances must be kept within narrow limits as the accuracy of form directly affects the running accuracy of the bearing. shafts should be to an h9 tolerance but the cylindricity should be to IT5/2 according to ISO 1101:2004.


Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-3000 characters
Post Sourcing Request >>